6ES7314-6EH04-4AB1

SIMATIC S7-300 CPU 捆绑包 组成部分： S7-300 CPU 314C-2PN/DP （6ES7314-6EH04-0AB0）, 2个前面板连接器 （6ES7392-1AM00-0AA0） 带螺丝触点，40针

西门子中国总公司-浔之漫智控技术（上海）有限公司经营西门子全新原装现货PLC；S7-200S7-300 S7-400 S7-1200 触摸屏，变频器，6FC，6SN，S120 G120C V90 V80伺服数控备件：原装进口电机（1LA7、1LG4、1LA9、1LE1），国产电机（1LG0，1LE0）大型电机（1LA8，1LA4，1PQ8）伺服电机（1PH，1PM，1FT，1FK，1FS）西门子全新原装产品‘质保一年。 西门子伺服驱动器现货

西门子PLC代理商   西门子PLC模块代理商  西门子PLC通讯模块代理商  西门子PLC模拟量模块代理商  西门子PLC模块总代理商

用于 AS-Interface 的 SIRIUS 3SF1 机械安全型开关

概述

3SF1 行程开关可直接通过 AS-Interface 总线系统连接，实现安全通信。该安全功能就没有必要再按照惯例进行接线。

通过 3SF1 行程开关，ASIsafe 电子组件可以集成到开关外壳中。

模块化系统中选型举例

模块化系统

3SF11.4 和 3SF12.4 系列行程开关具有模块化结构设计，由不同形式的基本开关和按钮头（需单独订购）组成。得益于开关的模块化设计，*终用户可以从为数众多的型号中选择适合自己应用的正确解决方案，并在很短时间内自行安装。

设计

3SF1 开关具有各种外壳尺寸：

塑料和金属外壳，符合标准 EN 50047，31 mm 宽，带 M12 插头

根据 EN 50041，塑料外壳，40 mm 宽，带 M12 插头

塑料外壳，50 mm 宽，带 M12 插头和 M12 插座

金属外壳，56 mm 宽，带 M12 插头和 M12 插座

显示

该开关系列配有带三个 LED 的状态显示屏：

LED 1（黄色）：F-IN1

LED 2（黄色）：F-IN2

LED 3（绿/红）：AS-i/FAULT

连接

到 AS-Interface 的连接是通过一个连接到黄色 AS-Interface 总线电缆的 4 极 M12 插头式连接器（塑料型）完成的。

宽外壳（50 或 56 mm）还具有用于连接第二个行程开关的 M12 接口。因此可以达到符合 EN ISO 13849-1 的 Category 4 D。

优势

The 3SF1 safety switches offer:

ASIsafe electronics integrated in the enclosure, with low power consumption < 60 mA

An extensive range of actuators

Status display with three LEDs

Can be integrated easily via TIA Portal

应用

With the standard position switches, mechanical positions of moving machine parts are converted into electrical signals. Through their modular and uniform design and large number of variants, the devices can comply with practically all requirements in industry.

Devices are available with enclosure versions to suit the particular ambient conditions. Different control tasks can be performed with the contact blocks best suited for the particular purpose. And many different actuator variants are available to match the mechanical configuration of the moving machine parts. Dimensions, fixing points and characteristics are largely in accordance with the EN 50041 or EN 50047 standards.

The devices are suitable for use in any climate.

Standards

The switches comply with IEC 60947‑1 (Low-Voltage Controlgear, General) and IEC 60947‑5‑1 (Electromechanical Control Circuit Devices).

The mechanical design of the switch corresponds to the requirements of the fail-safe principle according to ISO 14119.

Approvals

AS-Interface according to IEC 62026‑2

The 3SF1 position switches are approved according to UL 508, UL 50 and UL 746-C.

Safety circuits

Standard IEC 60947‑5‑1 requires positive opening of the NC contacts. In other words, for the purposes of personal safety, the assured opening of NC contacts is expressly stipulated for the electrical equipment of machines in all safety circuits and marked in accordance with the standard IEC 60947‑5‑1 with the symbol (→).

With a 3SF1 safety switch with (→), SIL 2 according to IEC 2061/IEC 61508 or PL c according to ISO 13849‑1 can be attained if the corresponding fail-safe evaluation units are selected from the ASIsafe program and correctly installed.

If a second 3SF1 safety switch with (→) is used, SIL 3/PL e can be attained.

Evaluation of safety functions

Safety Evaluation in the TIA Selection Tool

The safety evaluation for the standards IEC 62061 and ISO 13849-1 is performed quickly and easily, directly in the TIA Selection Tool. In addition to the fast and safe calculation of machine safety functions – from the definition of the system structure to the selection of components – this enables shared data management during all project phases. Take the next step in the digital design of machinery and equipment with Safety Evaluation in the TIA Selection Tool.

In addition, the functionalities of the proven Safety Evaluation Tool are still available. It determines the achieved safety integrity (SIL/PL) step-by-step. You receive the results as a standards-compliant report that can be integrated in the documentation as proof of safety.